Spinninglizzy's Weblog

Falling down the slippery fibre slope

Rasmussen Tie-Up Photo Post

Hi Everyone!

I’ve had many requests for tie-up details concerning the Rasmussen loom. I made the mistake a few years ago of over-tightening the cords that lead to the treadles. This resulted in a decreased shed. I’ve been dragging my heels on correcting that problem, so haven’t used the loom for at least three years! (And I really miss it!)

The loom is buried under lots of other things, as the quick remodel we had envisioned has stretched on much longer than we anticipated. Everything has to move from one room to another while work is being done, then moved yet somewhere else for the next job!

Without further ado, the pictures. (To see details, click for large size.)


Good luck with your Rasmussen loom!




14 July 2017 Posted by | Looms, Rasmussen / Montana | , , , , , | Leave a comment

Weaving On A Budget Of Practically Nothing, And Feeling My Mortality

At a family barbeque two weeks ago, my brother asked me conversationally: “So, is that your latest loom you’re working on?” What could I say, except: “Ummmm… no?”

I’m currently the owner of six looms.  Remember, I started two months ago on Father’s Day.  (Edited to add: I wrote most of this post two weeks ago, but waited until now to publish it since I didn’t have pictures of everything at the time.  As of today, I’m actually the owner of eight looms.  Stay tuned for a post introducing the two latest arrivals…)

I was weaving on my Easy Weaver (size A, small), a rigid heddle loom made by Harrisville Designs. These come pre-warped by the manufacturer, using the ingenious method of attaching velcro on both front and back beams to quickly warp the loom.  Mine was used, and two-thirds of the warp was already woven.  I impatiently finished off the last part (letting my son weave a few picks) so I could tie on a warp I prepared for my first try at tablet (or card) weaving.

Before the BBQ, I quickly tied on that first card-weaving project, “Sample Band A” from Candace Crockett’s “Card Weaving” book.  I started the first picks in the car.  It caught the interest of one of my nephews (a belt), so I’m already received my first commission!

I’m very happy with this sweet little loom.  It does exactly what I wanted it for, weaving in the car.  (The passenger seat, silly.  I can already “weave” when I’m in the driver’s seat!)  It was inexpensive, since it was used and missing one shuttle.  It’s the older model, so there’s no heddle block mounted on the base to interfere with tablets.  And it is perfect for my son to use if he wants.  I had a little difficulty getting the warp tight enough with my tablet weaving, since the apron rods I added on tended to slip and loosen the warp and cloth; I will try drilling holes through the rods (for the cording) to see if that will keep them from turning.  I finished off the belt (it’s horrible, made of jute, with lots of mis-turnings) and beamed on a second during a four-hour road trip to Vancouver, BC.  Alas, I ignored the advice to avoid using jute in a first project, for it proved finicky to handle as well as too rough and bulky for belts; they might be salvaged as luggage straps.

The tablets I used were purchased along with others of varying sizes, tiny shuttles, heddles and a backstrap belt with harness for a few dollars at a garage sale:

Then I snagged this electric bobbin winder for even less:

It was cheap because the motor was Danish and made for 220v electrical; I took it into a repair shop, where I was fortunate to find a used 110v motor to replace the original.

The day after the Easy Weaver arrived in the mail, I was practically gifted this 24″ Kromski Harp, with stand, by someone who ordered it new but never got around to taking it out of the box.

With an decoratively flourished heddle:

I don’t know if I’ll keep the Kromski.  Somehow, I just can’t love it as I do Hedy (Schacht), even though the Kromski has a larger weaving width and can accept two heddles, whereas Hedy is limited to one.    I’ve been dragging my heels on the very last bit of the assembly, tying on the apron strings and rods — some bother about finding a candle to melt some nylon ends together.  The ornate woodworking of the Kromski just doesn’t move me as do the quiet, square lines of the Schacht.  Also, I’ve received a few offers for it already, so I may not have it long.  I will add a later post with pictures to compare these two looms..

Last, I came across this handsome fellow, a 25″ Rasmussen table loom that had been stored for thirty years in perfect condition.

His name is Gil (Hebrew for Joy), he folds for portability,

and he came along with four books, including “Warping All By Yourself” by Cay Garrett, and Marguerite Porter Davison’s “A Handweaver’s Pattern Book”.  I don’t understand why, when I take out the bottom screw that locks the castle upright, the hole it comes out of misses alignment (when folded down) with a third hole to lock it when collapsed.  The difference in alignment is very small, but large enough that I don’t believe the difference is due to any warping.  Plus, it’s the same on both sides.  The hole that doesn’t match up is the one pictured below on the upper left:

I think I tried removing the screw on the upper right (instead of the bottom one), and found it doesn’t work, either.  Or perhaps it didn’t make sense to me, since the castle would have to tilt away from and not lock down the reed, and would not collapse as compactly.  I’ll try calling Montana Looms, the company now manufacturing these.  Gil’s collapsing feature isn’t quick or easy compared to my other table loom (Bergman Treasures And A Reprieve), plus he is bulkier and heavier.  It’s more likely that I’ll end up taking out the booster seat and putting down the back seat of the car rather than collapse this loom again.

In compensation for spending practically zilch on looms, I have been bankrupting myself on books –Peggy Osterkamp’s second and third, and “Mastering Weave Structures” by Sharon Alderman — plus accessories.  I purchased two hundred new metal heddles for Gil (more expensive than the loom), to bring him to five hundred.  And placed an order for a Schacht auto-reed hook (shockingly expensive) that I can’t wait to use.

OK, so the budget wasn’t practically nothing, but only because I kept stopping in at The Weaving Works to badger the nice people about my Lendrum fast flyer (hence the new books and accessories).  I’m learning that even if one buys everything top-drawer, and retail, those expenses would be nothing compared to the time investment involved.  Rather, that even if all the looms, tools, education, and yarn were free, weaving is incredibly expensive, time-wise.  (And if so much time is to be spent doing this, isn’t it a necessity to use the tools one likes best?!)

I think I’ve just made the argument that weaving cannot be be inexpensive, if one values time.

Reading through the used weaving books recently acquired, I’ve found names written inside, and small notes.  Most of the used books are circa 1970’s, with pictures of authors usually in their 30’s or later.  Why are so many weaving texts out of print, where are these people now, are they still weaving, and did they fulfill their dreams?  I muse on these things, and when looking at the authors, realise that many of these women may already have passed.  At least four of my looms are older than I, and with care may probably last longer.  Perhaps it’s silly, but I’m wistful, at the thought that my time to use each of these looms is running out.  There will be some point when I too must pass them on to the next weaver.  How can I possibly weave enough when dressing one loom has taken me more than twenty-four hours?!  My slowness at knitting never bothered me.  I’m not slow at spinning; but I suppose recently I am, since I’m never spinning, but always weaving warping.  I touch these older looms, read these older books, and I see my life dwindling down and I wonder why I am doing this, what am I accomplishing, is this adding meaning to my life, will my family survive this, should I stop before I’m in trouble, and why do I enjoy this?  Because, I truly don’t need another scarf.

9 September 2008 Posted by | Weaving | , , , , , , , , , , , , , , , , , | 12 Comments