Spinninglizzy's Weblog

Falling down the slippery fibre slope

Spinning, Spinning…The Need For Speed

My quill attachment for my Lendrum arrived last week.

I wanted to purchase one at least two months ago after following the Ravelry threads on it.  I kept delaying my purchase of one that was available, but when I was ready to shell out the money, the two that were available from different sites, were bought out from under me.  (Aaaarrrgggggghhhhhh!!!!!  Who dared buy my quill attachment???!!!)

I was feeling pretty moody last week (messy house/loom outside syndrome again), so of course I helped myself to another dose of misery by checking the sites again for the walnut quill attachment.  Yup, I confirmed they were still sold out. Then, for no reason other than sheer bull-headedness, I decided to call a small store in the mid-west whose site hinted at some walnut accessories.  Well: they had it, I bought it, they sent it, I got it.  Three days later.  The mailman was so proud of himself for delivering it.

 

As I took it out of the box, DS immediately commented “I like your new gun, Mama.”  One hour later as I rub my injuries: “What does it mean ‘impale’, Mama?”  Aha!  I know what Sleeping Beauty was spinning on!

 

Quill attachments, when made for spinning wheels, are usually for:
1) Spinning high-twist fibres like cotton, silk, and flax;
2) Spinning and plying bulky yarns that may have trouble fitting through a regular orifice; and
3) Getting a feel for a spindle before using a great wheel or charka.

I’ve seen some novelty yarns where one of the plies was threaded with beads.  I should note that a quill attachment is not a necessity for spinning cotton, silk, or flax; although it is a good substitute for a charka wheel.

Did I purchase a quill attachment for any of the valid reasons listed above?  Sadly, no.  Those are the reasons I’ve come up with after the fact, to justify my purchase.  No, I thought I had to have a quill because I’m a speed demon on my treadles and I have a need for speed that hasn’t been served by my current flyer ratios.

I’ve had a fast flyer on special order through my LYS (since I rarely purchase yarn, it really ought to my LSS — Local Spinning Store — or LWS — Weaving) since February.  My wheel is the limited edition walnut-coloured one made in 2001, so parts aren’t as readily available.  And because Mr. Lendrum has so many orders and does all the work himself,  the supposedly two-month waiting period is now at the half-year mark.  After I placed my order, I found several places online with the flyer in stock so I could have the flyer in my hands tomorrow by overnight express…  But my LSS didn’t require a deposit for the special order, and I’m loyal to them for that; so I’m still here, waiting. SIX. Months. Later.

Although one can draft out wool very quickly with a quill, it doesn’t meet my speed requirements BECAUSE I HAVE TO SPEND SO MUCH TIME WINDING ON THE YARN.  Sorry, I had to say that loud; because in all my research prior to purchasing the quill, that was not made clear to me.  In my defense, I have been considering the Rio Grande as a possible production wheel.  In the spinning video that I’ve seen where it was used, a nifty technique was used of pulling off the single and winding it back on without changing direction or stopping.  I tried it for a bit, but it doesn’t work too well for me, for at least three reasons:
1) I’m spinning a much finer, lace-weight single which breaks very easily when pulled off and back from the quill,
2) the treadle and quill placements are much more compressed on my upright wheel than on the larger Rio Grande, making my drafting length much shorter and treadling more cramped; and
3) the quill on the Lendrum is angled downward rather than horizontal.  If using a great wheel, winding on doesn’t take much more time or wasted motion because stopping and reversing the wheel direction is as fast as spinning, since turning the wheel is completely controlled by the hand.  On a foot-treadled, upright wheel, stopping to reverse and wind on takes up a lot of extra time (at least on my wheel) since it’s not easy to immediately stop and start up again.

 

All in all, I had fun trying out the quill; and it will be useful when I want to spin or ply bulky, novelty yarn.  Also, it’s cheaper than the plying head, although the two function differently.  (The only reason why I still want the bulky plying head is because it is perfect for spinning Judith MacKenzie’s Wolf Yarn – I’ll have to give it a try on the quill sometime.)  Also, the shock of being completely wrong about the quill has dampened (at least temporarily) my impatience for my fast flyer.   And I learned that the Rio Grande won’t be my first choice for a production wheel.   Still, there’s no need to delay work on my flyer, Mr. Lendrum!

Advertisements

6 August 2008 - Posted by | General, Spinning | , , , , , ,

No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: